Is Edexcel A-Level Maths 2026 Predicted Practice Paper — Paper 3 an official exam paper?

No. It is an original StudyVector predicted-practice paper for revision. It is not official, leaked or guaranteed, and students should still revise the full specification.

How many marks and questions are in this predicted paper?

This paper has 100 marks across 12 questions and is designed for a 120-minute practice session.

What are the A-Level Mathematics Paper 3 predictions for 2026?

StudyVector's 2026 A-Level Mathematics Paper 3 predicted paper focuses on statistics, mechanics, large data set, forces, hypothesis testing. This is an independent, Edexcel-style predicted-practice paper modelled on the published specification — it is not a leaked paper and is not official.

What is the A-Level Mathematics Paper 3 format (9MA0/03)?

A-Level Mathematics Paper 3 (9MA0/03) is 100 marks over 120 minutes. 9MA0/03 model: 100 marks, 120 minutes.

Published 8 March 2026Updated 22 April 2026By Lizzie D., founderPrivacy Policy

Source note: use official specifications as the source of truth. StudyVector is an independent revision platform. AQA, Pearson Edexcel and OCR

Direct answer

This page hosts StudyVector’s independent 2026 A-Level Mathematics Paper 3 predicted-practice paper modelled on 9MA0/03,100 marks over 120 minutes. Predicted focus topics: statistics, mechanics, large data set, forces, hypothesis testing. It is not an official paper, not a leaked paper and not a guarantee — students should still revise the full specification and verify against official past papers from Pearson Edexcel.

Qualification: A-Level Mathematics
Exam board model: Pearson Edexcel
Paper code: 9MA0/03
Total marks: 100 marks
Time allowed: 120 minutes
Last reviewed: 16 May 2026

StudyVector is independent revision support, not affiliated with AQA, Edexcel, OCR, JCQ or any exam provider. Always verify topic coverage with your exam-board specification.

Predicted paper

Edexcel A-Level Maths 2026 Predicted Practice Paper — Paper 3

Q: Which topics are likely to come up in A-Level Mathematics Paper 3 2026?

Based on the Edexcel-style structure and recent paper patterns, StudyVector's prediction prioritises: statistics; mechanics; large data set; forces; hypothesis testing. Students should still revise the full specification because exam boards rotate topics.

A-Level Mathematics · Edexcel-style · 120 minutes · 100 marks

Modelled component: 9MA0/03 · Calculator permitted

9MA0/03 model: 100 marks, 120 minutes.

Prediction type: predicted_paper · Evidence mode: historical · Full-length original StudyVector predicted-practice paper modelled on public exam-board structure. It is not official, leaked or guaranteed.

Evidence basis: public exam-board specification structure, historical topic weighting patterns, StudyVector practice-quality review.

AI-generated practice paper. Not an official Edexcel-style paper, not leaked exam content, and not an exam-board endorsement.

Predicted difficulty score (practice signal)

0–100 model (higher = more demanding)

Candidate focus topics (not guarantees)

statistics
mechanics
large data set
forces
hypothesis testing

Preview mode

0/12 questions attempted · score 0/100 (0%)

120:00Warm up with cards Play Daily

Section A: Statistics

Statistics, probability and data interpretation questions. Answer ALL questions.

Question SECTION-A-STATISTICS1 (4 marks)
A-Level Statistical Sampling problem. A sample of 40 students is used to test a claim about revision time. The summary statistic is compared with a 5% significance level. (a) State suitable hypotheses. (b) Carry out the required calculation or decision step. (c) Interpret the result in the context of the claim.
Question SECTION-A-STATISTICS2 (6 marks)
A-Level Data Presentation problem. Answer this exam-style question on Data Presentation. You should show clear working, justify each step and give your final answer in a suitable form.
Question SECTION-A-STATISTICS3 (8 marks)
A-Level Probability problem. A sample of 46 students is used to test a claim about revision time. The summary statistic is compared with a 5% significance level. (a) State suitable hypotheses. (b) Carry out the required calculation or decision step. (c) Interpret the result in the context of the claim.
Question SECTION-A-STATISTICS4 (10 marks)
A-Level Statistical Distributions problem. A sample of 49 students is used to test a claim about revision time. The summary statistic is compared with a 5% significance level. (a) State suitable hypotheses. (b) Carry out the required calculation or decision step. (c) Interpret the result in the context of the claim.
Question SECTION-A-STATISTICS5 (10 marks)
A-Level Hypothesis Testing problem. A sample of 52 students is used to test a claim about revision time. The summary statistic is compared with a 5% significance level. (a) State suitable hypotheses. (b) Carry out the required calculation or decision step. (c) Interpret the result in the context of the claim.
Question SECTION-A-STATISTICS6 (12 marks)
A-Level Mechanics — Kinematics problem. A particle moves in a straight line. Its velocity is modelled by v = 7t - 10, where t is measured in seconds. (a) Find the time when the particle is instantaneously at rest. (b) Find the displacement between t = 0 and t = 9. (c) Explain one modelling assumption used in your calculation.

Section B: Mechanics

Mechanics modelling and problem-solving questions. Answer ALL questions.

Question SECTION-B-MECHANICS1 (4 marks)
A-Level Mechanics — Forces problem. A particle moves in a straight line. Its velocity is modelled by v = 8t - 11, where t is measured in seconds. (a) Find the time when the particle is instantaneously at rest. (b) Find the displacement between t = 0 and t = 10. (c) Explain one modelling assumption used in your calculation.
Question SECTION-B-MECHANICS2 (6 marks)
A-Level Mechanics — Moments problem. A particle moves in a straight line. Its velocity is modelled by v = 9t - 12, where t is measured in seconds. (a) Find the time when the particle is instantaneously at rest. (b) Find the displacement between t = 0 and t = 11. (c) Explain one modelling assumption used in your calculation.
Question SECTION-B-MECHANICS3 (8 marks)
A-Level Statistical Sampling problem. A sample of 64 students is used to test a claim about revision time. The summary statistic is compared with a 5% significance level. (a) State suitable hypotheses. (b) Carry out the required calculation or decision step. (c) Interpret the result in the context of the claim.
Question SECTION-B-MECHANICS4 (10 marks)
A-Level Data Presentation problem. Answer this exam-style question on Data Presentation. You should show clear working, justify each step and give your final answer in a suitable form.
Question SECTION-B-MECHANICS5 (10 marks)
A-Level Probability problem. A sample of 70 students is used to test a claim about revision time. The summary statistic is compared with a 5% significance level. (a) State suitable hypotheses. (b) Carry out the required calculation or decision step. (c) Interpret the result in the context of the claim.
Question SECTION-B-MECHANICS6 (12 marks)
A-Level Statistical Distributions problem. A sample of 73 students is used to test a claim about revision time. The summary statistic is compared with a 5% significance level. (a) State suitable hypotheses. (b) Carry out the required calculation or decision step. (c) Interpret the result in the context of the claim.

Train weak areas

Turn this paper into targeted practice. Start with the topics where you lost marks, then come back and resit the same style of question.

Start low-focus cards Play Daily Save full practice progress

Direct answer

Qualification

A-Level Mathematics

Exam board model

Pearson Edexcel

Paper code

9MA0/03

Total marks

100 marks

Time allowed

120 minutes

Last reviewed

16 May 2026

StudyVector is independent revision support, not affiliated with AQA, Edexcel, OCR, JCQ or any exam provider. Always verify topic coverage with your exam-board specification.

Edexcel A-Level Maths 2026 Predicted Practice Paper — Paper 3

A-Level Mathematics · Edexcel-style · 120 minutes · 100 marks

Modelled component: 9MA0/03 · Calculator permitted

9MA0/03 model: 100 marks, 120 minutes.

Evidence basis: public exam-board specification structure, historical topic weighting patterns, StudyVector practice-quality review.

Section A: Statistics

Statistics, probability and data interpretation questions. Answer ALL questions.

Question SECTION-A-STATISTICS1 (4 marks)

A-Level Statistical Sampling problem. A sample of 40 students is used to test a claim about revision time. The summary statistic is compared with a 5% significance level. (a) State suitable hypotheses. (b) Carry out the required calculation or decision step. (c) Interpret the result in the context of the claim.

Question SECTION-A-STATISTICS2 (6 marks)

A-Level Data Presentation problem. Answer this exam-style question on Data Presentation. You should show clear working, justify each step and give your final answer in a suitable form.

Question SECTION-A-STATISTICS3 (8 marks)

A-Level Probability problem. A sample of 46 students is used to test a claim about revision time. The summary statistic is compared with a 5% significance level. (a) State suitable hypotheses. (b) Carry out the required calculation or decision step. (c) Interpret the result in the context of the claim.

Question SECTION-A-STATISTICS4 (10 marks)

A-Level Statistical Distributions problem. A sample of 49 students is used to test a claim about revision time. The summary statistic is compared with a 5% significance level. (a) State suitable hypotheses. (b) Carry out the required calculation or decision step. (c) Interpret the result in the context of the claim.

Question SECTION-A-STATISTICS5 (10 marks)

A-Level Hypothesis Testing problem. A sample of 52 students is used to test a claim about revision time. The summary statistic is compared with a 5% significance level. (a) State suitable hypotheses. (b) Carry out the required calculation or decision step. (c) Interpret the result in the context of the claim.

Question SECTION-A-STATISTICS6 (12 marks)

A-Level Mechanics — Kinematics problem. A particle moves in a straight line. Its velocity is modelled by v = 7t - 10, where t is measured in seconds. (a) Find the time when the particle is instantaneously at rest. (b) Find the displacement between t = 0 and t = 9. (c) Explain one modelling assumption used in your calculation.

Section B: Mechanics

Mechanics modelling and problem-solving questions. Answer ALL questions.

Question SECTION-B-MECHANICS1 (4 marks)

A-Level Mechanics — Forces problem. A particle moves in a straight line. Its velocity is modelled by v = 8t - 11, where t is measured in seconds. (a) Find the time when the particle is instantaneously at rest. (b) Find the displacement between t = 0 and t = 10. (c) Explain one modelling assumption used in your calculation.

Question SECTION-B-MECHANICS2 (6 marks)

A-Level Mechanics — Moments problem. A particle moves in a straight line. Its velocity is modelled by v = 9t - 12, where t is measured in seconds. (a) Find the time when the particle is instantaneously at rest. (b) Find the displacement between t = 0 and t = 11. (c) Explain one modelling assumption used in your calculation.

Question SECTION-B-MECHANICS3 (8 marks)

A-Level Statistical Sampling problem. A sample of 64 students is used to test a claim about revision time. The summary statistic is compared with a 5% significance level. (a) State suitable hypotheses. (b) Carry out the required calculation or decision step. (c) Interpret the result in the context of the claim.

Question SECTION-B-MECHANICS4 (10 marks)

A-Level Data Presentation problem. Answer this exam-style question on Data Presentation. You should show clear working, justify each step and give your final answer in a suitable form.

Question SECTION-B-MECHANICS5 (10 marks)

A-Level Probability problem. A sample of 70 students is used to test a claim about revision time. The summary statistic is compared with a 5% significance level. (a) State suitable hypotheses. (b) Carry out the required calculation or decision step. (c) Interpret the result in the context of the claim.

Question SECTION-B-MECHANICS6 (12 marks)

A-Level Statistical Distributions problem. A sample of 73 students is used to test a claim about revision time. The summary statistic is compared with a 5% significance level. (a) State suitable hypotheses. (b) Carry out the required calculation or decision step. (c) Interpret the result in the context of the claim.